C1001 Oil Drain Plug Key Set (12pc)

Suitable for sump plugs on engine, gearbox and back axle. 3/8" hex - 5/16" square; 8mm hex - 3/8" square; 9mm hex - 11mm square; 10mm hex - 13mm square; 12mm hex - 17mm square; 14mm hex - 16mm lenght tommy bar

View

9333 Dr. Twist Socket Set (11pcs 3/8”)

MANNOL 9333 Twist Socket Set is a tool and it is specially designed for loosening nuts which cannot be loosened by a socket or wrench. It can also be used when a nut cannot be loosened because of rust, wear or deformation. The sockets are designed to be used with ratchet wrenches, never use them with an air wrench.

View

9318 Dr.Socket Set 1/4"&1/2"(94pc)

1/2" 6-point Sockets 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 27mm, 30mm, 32mm; long sockets: 14mm, 15mm, 17mm, 19mm; spark plug socket: 16mm, 21mm 1/4" 6-point Sockets: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm 1/4" Bits: Ph: 1, 2, 3; Pozi: 1, 2;...

View

9311 Oil Filter Wrench

Universal oil filter wrench for Spin-On Filters with diameter 51-111mm.

View

9312 Oil Filter Wrench Set (15pc)

Oil Filter Wrench Set (15 pcs). HC - 74/76 mm - 15 flutes - 2 step HC - 74/76 mm - 14 flutes - 2 step HC - 93 mm - 15 flutes - 1 step HC - 65/67 mm - 14 flutes - 2 step HC - 73 mm - 14 flutes - 1 step HC - 80 mm - 15 flutes - 1 step HC - 68 mm - 14 flutes - 1 step HC - 93 mm - 36 flutes - 1 step HC - 90 mm - 15 flutes - 1 step...

View

9321 Socket Set 1/2" (26pc)

1/2" Metrinch-Sockets: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20/21mm, 22mm, 23mm, 24mm, 25mm, 26/27mm, 28mm, 29/30mm, 31/32mm, spark plug socket: 16mm, 21mm 1/2" Extension bar: 150mm, 250mm 1/2" Ratchet handle 1/2" T-Adapter 1/2" Universal joint

View

9304 Wrench Set NN8-22(14pc)

Wrenches: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm

View

A1013 Filter Wrench Set (23pc)

23pc Aluminum Oil Filter Cup Wrench Set includes: 1x 65mm; 1x 67mm; 2x 73mm; 5x 74mm; 2x 75mm;1x 76mm; 1x 79mm; 1x 79.5mm; 1x 84mm; 1x 89mm; 1x 90mm; 1x 91mm; 1x 92mm; 1x 95mm; 1x 101mm; 1/2" Dr. Ratchet Handle; 12 Point 22mm wrench

View

A1049 Filter Wrench Set (9pc)

9pc Oil Filter Wrench Set includes: 2x 14 Flutes - 64.5mm; 1x 15 Flutes - 88.2mm; 1x 16 Flutes - 74.2mm; 1x Hex - 27mm; 1x Hex - 32mm; 1x Hex - 36mm; 1x Adjustable Grip Socket: workable range 63-83mm

View

A1065 Filter Wrench

NEW: UNIVERSAL Oil Filter Wrench 1/2'' inch 21 mm for 80-115 mm Filters

Universal oil filter wrench for 80-115 mm filters. Designed for quick and easy removing and installation of oil filters. Applicable with either an 1/2'' drive or a 21 mm spanner. The arm length (working area or depth respectively) is ca. 3 cm. Colour:...

View

A1066 Filter Wrench

NEW: UNIVERSAL Oil Filter Wrench 1/2'' inch 21 mm for 110-140 mm Filters

Universal oil filter wrench for 110-140 mm filters. Designed for quick and easy removing and installation of oil filters. Applicable with either an 1/2'' drive or a 21 mm spanner. The arm length (working area or depth respectively) is ca. 3 cm....

View

F1005 Oil Drain Pan 7L

Oil drain pan used to collect old oil from vehicles for an easier and cleaner oil change.

View

F1004 Oil Drain Pan 15L

Oil drain pan used to collect old oil from vehicles, being provided with an integrated funnel and large carry handles for a more practical use. Perfect for an easier and cleaner oil change.

View

RT01VS-530K Ratchet Cargo Tie-Down Straps

Tie-down straps are specifically designed to hold loads in place on trucks, trailers, rail cars, ships and other freight carriers. Heavy-duty ratchet straps work effectively by ratcheting down tightly over a load providing not only stability, but security as well. Cargo ratchet straps are made of high-quality Polyester to minimize...

View

AH-02 Compressor Air Hose PU 10m

AH-02 Compressor Air Hose PU 10 m is a spiral compressor hose of 10 m length, designed for supplying air tools with compressed air. The hose is made of polyurethane and it is resistant to wear, tear as well as fire. The coupling is easily released and ensures a quick and comfortable connection of the compressor to air tools.

View

9310 Grease Gun

Grease gun for grease dosing from 400g grease cartridges. High-quality design with galvanized grease tank, ergonomically shaped handle and two 300 mm safety reinforced rubber hoses. with galvanized grease tank, ergonomically shaped handle and 2 x 300 mm safety reinforced rubber hoses.

Pull out the metal rod at the end of the...

View

9316 Lever Type Drum Pump

Hand pump with telescopic pipe for barrels from 60 up to 208 liters. Oil, fuel, additives and other non-corrosive liquids can be pumped. The pump is equipped with a ergonimoical plastic handle. A high-quality chrome-plating guarantees durability. Suitable for drums of 47-90 cm height.

View

9316/1 Oil Pump

Hand pump for barrels from 60 up to 208 liters. Oil, fuel, additives and other non-corrosive liquids can be pumped. The pump is equipped with a ergonimoical plastic handle. A high-quality chrome-plating guarantees durability. Suitable for drums of 47-90 cm height.

View

9299 Pneumatic Pump Set

Professional stationary pneumatic oil pump for Workshops incl. compressor, tubes, tube coil

View

9317 Oil Extractor

This 9 litres transfer pump is suitable for filling and drawing off of nearly all liquids. Suitable for all oils, antifreeze, water etc. Thanks to the chemical resistance, the non-corrosiveness and the temperature resistance of the HDPE construction this pump is also suitable for use in the industrial sector. An automatic overfill...

View

9337 Manual Fluid Dispenser System



View

ADD501A Refractometer

The automotive ADD501A Refractometer is designed for accurately measuring the strength of battery fluid, screenwash and antifreeze by measuring the refractive index of light passing through the mixture. With the indication of the percentage you may know at which temperature the fluid will be frozen for both propylene glycol and...

View

MN1065 Fender Cover

MN1065 – protective cover for fenders with magnetic closure and MANNOL logo.
Designed to protect the front fender of cars during repair and maintenance work in the engine compartment while the bonnet is open. Protects the fender of the vehicle against scratches, oil as well as dirt and increases the mechanic’s work...

View

9199 Mobile Grease Pump Unit



View

HC-2197 Altoelsammler

Mobile unit for collection of waste oil through the oil filler hole with a help of probe, as well as in a traditional way, through the oil drain with the help of funnel. Collected oil falls into a special container and is being disposed. Intake of oil is made by compressed air pressure of 10.8 bar. Quick and easy removal of waste oil...

View

GS-432 Brake Fluid Exchanger

Professional device for venting brake and clutch systems with compressed air support. Massive, robust design for daily use in workshops. The compressed air and the brake fluid are separated by a membrane, so that no water can seep into the brake fluid. The working pressure can be adjusted with a pressure regulator from 0 to 2 bar by a...

View

DT800R-PNEU Water Tank Fluid Exchanger

The Water Tank Fluid Exchanger DT800R-PNEU pumps water and service fluids from closed systems such as the cooling circuit of vehicles. In addition to fluid exchange, the unit can also be used to clean closed systems, flushing any impurities out of the pipes to support proper operation. Detailed user instructions can be found in the...

View

GA322-PNEU Transmission Fluid Exchanger

The characteristics of the transmission fluid being used in an automatic gearbox deteriorate after a certain period of time. Not changing it on time causes a function change of the transmission fluid and affects the transmission characteristics in a negative way. Due to constructional issues it is not always possible to drain the...

View

GD322B-ELEC Transmission Fluid Exchanger Electrical

The characteristics of the transmission fluid being used in an automatic gearbox deteriorate after a certain period of time. Not changing it on time causes a function change of the transmission fluid and affects the transmission characteristics in a negative way. Due to constructional issues it is not always possible to drain the...

View

AC636H A/C Fully-automatic service station

Automatic device for filling of air conditioning systems for hybrid and electric vehicles for which the manufacturer prescribes the use of R134a.

For more information, refer to the device’s instruction manual.

View

Oil Leak Stop Kit

Tool for leak testing/inspection of auto oil filters. Adapter measurements: 1-12UNF; 3/4-16UNF; 11/8-16UNF; 13/16-16UNF M12x1.5; M16x1.5; M18X1.5; M30x1.5; M22x1.5

View

DIN61 Dispensing Tap for 20L Drum

The innovative Dispensing Taps for 20 L MANNOL containers and 1,000 L IBC containers enable easy, clean and fast dispensing of liquids without clucking. Thanks to the patented ventilation system, the Dispensing Tap offers a very high discharge capacity with a flow rate of > 10 L/min. Dispensing Taps are characterised by their excellent...

View

DIN-G3/4 Dispensing Tap for 60/200L Drum

Dispensing Tap DIN-G3/4 for 60 and 200 Liter containers and drums are perfectly suitable for simple, clean and quick refilling of fluids without gurgling. Dispensing Tap are leak proof even with aggressive chemical compounds and strongly creeping fluids.

View

9370 Pressure Sprayer steel manual

Durable chemical resistant 3L sprayer, especially suitable for professional cleaning with aggressive solvents in hard to reach areas. Seals and lines are resistant to all common cleaning agents, solvents, petrol and oils.

Cable Ties

Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40°F to 185°F (-40°C to 80°C). Heat stabilized from -40°F to 221°F (-40° to 105°C).

View

Clamp

SCT-Hose Clamps are multi-use hose clamps for applications with high mechanical load. With their fundamental technical characteristics they still set the standarts for the modern clip construction. This kind of clips is used with cooling water and fuel connections, oil and air lines into the under and over-pressure range.

View