Quick Search
Online Catalogue Where to buy
 
Press Releases
Facebook MANNOL Global Facebook SCT-Germany
More details ...
Dates & Events
Automechanika Frankfurt 2018
More details ...
 

MANNOL 9891 PAG 46 Refrigerant oil

Operating and service fluids > A/C system fluids

 

Fully synthetic oil which is used for lubrication, sealing and cooling of refrigerant compressors or refrigerant circuits in passenger or commercial vehicles’ air conditioning systems. Miscible with type R134a fluids. Complies with the requirements of standard refrigerant compressors and refrigeration system manufacturers.

Wet the seals with a brush during assembly. To top up or replace the refrigerant oil use a special filling cylinder and an air conditioning system filling device. Always reseal the package after use to prevent the oil from absorbing moisture from the air.

Automotive air conditioning compressors require specific types of lubricants. Most 1996 and newer A/C systems use the R134a refrigerant and require some type of PAG (polyalkylene glycol) oil for the compressor. If the wrong type of compressor oil or the wrong viscosity compressor oil is used, it may damage the compressor. In fact, the main reason for a newly installed A/C compressor to fail is using the wrong type of compressor oil.

CAUTION:

  • PAG oils should NEVER be used in hybrid vehicles because they are electrically conductive. POE (polyol ester) oils are usually specified for hybrid cars that have electrically driven A/C compressors because they are non-conductive. Using the wrong oil may allow current to short circuit back through the A/C compressor, creating a shock hazard.
  • Mineral oils should only be used in older R-12 A/C compressors because R-12 will not mix with the R134a refrigerant.
  • ”Universal” A/C compressor oils are often PAO-based and do not have the same viscosity as the PAG oils recommended for a specific type of compressor. This can lead to poor lubrication and premature compressor failure.
  • PAO (Polyalphaolefin) oil can sometimes be used as a substitute for certain PAG oils if the compressor manufacturer approves it.
  • Newer vehicles with R-1234yf A/C systems require a special 1234yf compressor oil specified by the vehicle manufacturer. General Motors recommends GM lubricants only (PAG-PSD1 #19260643 for 2013/14 Cadillac XTS, and PAG-ND12 #19299051 for 2013 Cadillac ATS). Universal compressor oils should NOT be used in R-1234yf applications.

    PAG Oil Recommendations for Various Compressors
    Cooling System Type
    Calsonic CR14 PAG 46
    Calsonic CWV6 PAG 46
    Calsonic V6 PAG 46
    Chrysler A590 PAG 46
    Chrysler C171 PAG 46
    Denso 10P PAG 46
    Denso 10S PAG 46
    Denso 6C PAG 46
    Denso 6CA PAG 46
    Denso 6E PAG 46
    Denso 6P PAG 46
    Denso 6SB PAG 46
    Denso 7SB PAG 46
    Denso SC08 PAG 46
    Ford FS10 PAG 46
    Ford FS6 PAG 46
    Ford VF2 PAG 46
    Hadsys HS-090L PAG 46
    Hadsys RC17 PAG 46
    Hitachi (all models) PAG 46
    Matsushita (all models) PAG 46
    Mitsubishi (all models) PAG 46
    Panasonic (all models) PAG 46
    Sanden SD7 (splined shaft) PAG 46
    Sanden SD7V PAG 46
    Sanden TR PAG 46
    Sanden TRF PAG 46
    Sanden TRS PAG 46
    Zexel DCW PAG 46
    Zexel DKS PAG 46
    Zexel TM PAG 46
    Bosch Axial PAG 100
    Calsonic DKV PAG 100
    Chrysler RV2 PAG 100
    Denso 2C PAG 100
    Denso TV PAG 100
    Keihin (all models) PAG 100
    Nihon DKV PAG 100
    Nihon NVR PAG 100
    Sanden SD5 PAG 100
    Sanden SD7 PAG 100
    Seiko-Seiki (all models) PAG 100
    Tecumseh (all models) PAG 100
    York (all models) PAG 100
    Zexel DCV PAG 100
    Zexel DKP PAG 100
    Zexel DKV PAG 100
    Calsonic V5 PAG 150
    GM A6 PAG 150
    GM HR/HT PAG 150
    GM R4 PAG 150
    GM V5 PAG 150
    GM V7 PAG 150
    Denso 10SRE18 PAG ND-8
    Visteon RS-18 PAG VC-46
    Sanden Electric SE-10Y




    250ml (9881)