Specifications
    Approval
    Recommendation
  • ISO Viscosity Grade 220
  • DIN 51517-3
  • ISO 6743-6 (CKC)
  • ISO 12925-1 Type CKC
  • ISO 12925-1 Type CKD
  • ANSI AGMA 252.04
  • US STEEL 224
  • Packaging


    20LMN2801-20Plastic
    MN2801-20
    208LMN2801-DRDrum
    MN2801-DR
    1000LMN2801-IBCPallet tank
    MN2801-IBC

    MANNOL Gear Oil ISO 220 2801

    MN2801-20MN2801-DRMN2801-IBC
    Attention! The packaging is illustrative and may differ from its actual appearance. For the latest list of specifications, see the text section.

    An industrial mineral reduction gear oil for use in gear transmissions of modern imported and domestic equipment requiring the use of high-quality oils with enhanced antiwear and anti-scuffing ЕР (Extreme Pressure) properties.

    Product properties:
    - It has excellent antiwear and anti-scuffing properties due to the use of the modern antiwear and antifriction additive package. It allows decreasing the likelihood of scuffing, pitting, fretting corrosion, sulphur corrosion and simultaneously reducing power consumption. It allows reducing the break-in period;
    - It has excellent antioxygenic properties, antifoaming and demulsifying characteristics that allow increasing the time between oil changes and extending the service life of the equipment even in the event of a possible water contamination. It reduces repairs and maintenance costs;
    - It efficiently mitigates all types of corrosion of ferrous and non-ferrous alloys and is perfectly compatible with all types of seals and inserts;
    - Due to good low-temperature properties, it preserves its working capacity at low ambient temperatures (up to – 28 °С);
    - Due to its universality, it allows standardizing the assortment of reduction gear oils used in the company;
    - It enhances the surface condition even if it is damaged, it has a micro-smoothing effect.

    It is recommended for industrial closed gear wheels (reducers), lubricated by circulation or spraying (oil mist), especially when there are heavy loads and high temperatures, vibrations, high speed and sliding friction. It may be used for lubricating various mechanisms and separate parts that operate under heavy loads: all types of gear systems (including worm and screw), clutches and all types of bearings: roller, friction, etc., where the required level of operating properties is DIN 51517 Part 3 CLP and viscosity is ISO VG 220.

    • SDS
    • TDS
    • Pictures

      Specifications
      Approval
      Recommendation
  • ISO Viscosity Grade 220
  • DIN 51517-3
  • ISO 6743-6 (CKC)
  • ISO 12925-1 Type CKC
  • ISO 12925-1 Type CKD
  • ANSI AGMA 252.04
  • US STEEL 224
  • Packaging


    20LMN2801-20Plastic
    MN2801-20
    208LMN2801-DRDrum
    MN2801-DR
    1000LMN2801-IBCPallet tank
    MN2801-IBC